Traditional Systems Inperca logo

.
Homepage .
 
Why Inperca?
Our History
Our People
Our Quality
Our Technology

Our Products
Traditional Systems
2000 Series Systems
Air Curtains
Heat Exchangers
Blower Wheels


Contact Us
Main Office
Distributors

Helpful Hints
Proper Selection
Proper Handling and Installation
Proper Maintenance

High Efficiency




 




General Features

Galvanized steel cabinet highly resistant to corrosion.
High efficiency and ultra low sound compressors.
Heavy duty, permanently lubricated and reduced electrical consumption motors. Provided with three speeds, for the evaporating unit.
High performance coil manufactured with aluminum fins and copper tubing.
Low and high pressure controls for the protection of the compressor.
All units from 60.000 Btu/h on are provided with expansion valves.
Operating capacities higher than nominals.
Standard electrical components for easy replacement.
Electrical panels with all devices for power and control.
Steel gray hammer finish air dry paint coating.


Classification

SPLIT Type
A. Condensing Units
_ Blower Wheel
_ Axial Flow Fan
_ Axial Flow Fan with Bottom Draft
B. Evaporating Units
_ Standard
_ Duct
_ Horizontal Fan Coil
_ Floor Unit
_ Air Handler

PACKAGE Type
A. Blower Wheel
B. Axial Flow Fan



BLOWER WHEEL Condensing Unit
(back to top)

Designed to take and discharge condensation air on the same face which allows them to be used indoors (at wall level) and outdoors with main application in apartments buildings. They include high efficiency centrifugal fans for a smooth and quiet operation. Manufactured in capacities from 1 up to 10 cooling tons.  


Model Nominal Capacity (Btu/h)  Width (inches) Height (inches)  Depth (inches) Approx. Weight (Pounds)
C012000ARX  12,000  23.54  24.80  15.94  168.7
C018000ARX  18,000  28.50  25.43  17.44  189.6
C024000ARX  24,000  35.12  32.28  19.06  207.3
C030000ARX  30,000  35.12  34.57  20.75  224.9
C036000XRX  36,000  35.12  34.57  20.75  228.2
C048000XRX  48,000  46.46  39.96  20.47  315.3
C060000XRX  60,000  46.46  39.96  20.47  315.3
C036036XRX  72,000  38.43  42.24  21.69  392.5
C048048XRX  96,000  66.54  42.40  20.55  504.9
C060060XRX  120,000  66.54  42.40  20.55  519.5


AXIAL FLOW FAN Condensing Unit
(back to top)

Designed to take external air horizontally, from one or two sides (depending on its model) and to discharge it vertically. Their main application is for outdoors and are equipped with high efficiency axial fans for a smooth and quiet operation. Manufactured in capacities from 8 up to 50 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
C090000XVX  90,000  66.54  42.40  32.27  507.2
C048048XVX  96,000  66.54  42.40  32.27  504.9
C060060XVX  120,000  66.54  42.40  32.27  521.5
C120000XVX  120,000  66.54  42.40  32.27  528.1
C144000XVX  144,000  66.54  45.87  46.46  725.4
C090090XVH
C180000XVS
 180,000  74.21  68.90  50.20  1,521.5
C120120XVH
C240000XVS
 240,000  74.21  68.90  50.20  1,565.6
C150150XVH
C300000XVS
 300,000  77.17  47.20  70.08  1,689.0
C360000XVS  360,000  77.17  62.20  70.08  2,044.0
C240240XVS  480,000  109.57  80.83  84.09  2,829.0
C300300XVS  600,000  109.57  96.73  84.09  2,921.6



AXIAL FLOW FAN WITH BOTTOM DRAFT Condensing Unit
(back to top)

Designed to take external air from the bottom and to discharge it vertically. These are heavy duty systems with main application in outdoors. Their high efficiency axial fans assure a smooth and quiet operation. Manufactured in capacities of 15 and 20 cooling tons.


 Model Nominal Capacity (Btu/h) Width (inches) Height (inches) Depth (inches) Approx. Weight (Pounds)
C090090XVH
C180000XVS
 180,000  61.02  39.37  83.62  1,455.3
C120120XVH
C240000XVS
 240,000  61.02  39.37  83.62  1,495.0


STANDART Type Evaporating Unit
(back to top)

Their versatile design allows them to be installed in horizontal or vertical position with air discharge horizontal or vertical as well. They include high efficiency blower wheels, direct drive motors and thermal-acoustic insulation for a smooth and quiet operation. Manufactured in capacities from 2 to 10 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 E024AXXSX  24,000  35.43  31.89  16.54  123.5
 E030AXXSX  30,000  35.43  31.89  16.54  130.5
 E036AXXSX  36,000  35.43  31.89  16.54  130.5
 E048AXXSX  48,000  46.46  38.66  17.72  183.9
 E060AXXSX  60,000  46.46  38.66  17.72  190.1
 E096AXXSX  96,000  66.46  41.10  21.81  307.8
 E120AXXSX  120,000  66.46  41.10  21.81  330.8


DUCT Type Evaporating Unit
(back to top)

Their compact design allows them to be placed in reduced spaces and because of their versatile design can be installed in horizontal or vertical position with air discharge horizontal or vertical as well. They include high efficiency blower wheels, direct drive motors (excepting for the 6 cooling tons model) and thermal-acoustic insulation for a smooth and quiet operation. Manufactured in capacities from 3 to 6 cooling tons.


Model Nominal Capacity (Btu/h) Width (inches) Height (inches) Depth (inches) Approx. Weight (Pounds)
 E036AXXDX  36,000  22.13  45.67  19.76  122.6
 E048AXXDX  48,000  30.79  45.67  19.76  148.6
 E060AXXDX  60,000  30.79  45.67  19.76  159.2
 E072XXXDX  72,000  38.27  41.46  28.38  242.6

 

HORIZONTAL FAN COIL Type Evaporating Unit
(back to top)

Their compact design allows them to be installed almost any where, for instance, over false ceilings. They include high efficiency blower wheels, direct drive motors and thermal-acoustic insulation for a smooth and quiet operation. Manufactured in capacities from 1 to 5 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 E012HHFX  12,000  22.56  11.81  20.28  44.1
 E018HHFX  18,000  36.50  11.81  23.03  60.4
 E024HHFX  24,000  36.50  11.81  23.03  80.7
 E030HHFX  30,000  40.08  11.81  29.13  104.3
 E036HHFX  36,000  40.08  11.81  29.13  108.0
 E048HHFX  48,000  44.09  11.81  33.27  131.9
 E060HHFX  60,000  44.09  11.81  33.27  138.0


FLOOR UNIT Type Evaporating Unit
(back to top)

This model is ideal for places where the use of air conditioning was not foreseen. Their decorative design does not require the use of ducts or grilles. This model uses high efficiency blower wheels and direct drive motors mounted on resilient bases to guarantee an extra  smooth and quiet operation. Units are easy to install and maintain. Available in capacities from 1 to 3 cooling tons


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 E012AVVCX  12,000  33.15  28.46  10.43  86.0
 E018AVVCX  18,000  33.15  28.46  10.43  87.8
 E024AVVCX  24,000  43.43  28.46  10.43  117.1
 E030AVVCX  30,000  43.43  28.46  10.43  124.8
 E036AVVCX  36,000  43.43  28.46  10.43  124.8


AIR HANDLER Type Evaporating Unit
(back to top)

Their versatile design allows them to be installed in horizontal or vertical position with air discharge horizontal or vertical as well. They include high efficiency blower wheels, pulley-belt transmission and thermal-acoustic insulation for a smooth and quiet operation. Available in capacities from 12 to 50 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 E144BXXSX  144,000  66.54  46.06  26.38  599.8
 E180BXXSX  180,000  64.41  66.93  33.46  882.0
 E240BXXSX  240,000  64.41  81.10  40.56  1,036.4
 E300BXXSX  300,000  92.13  79.41  40.00  1,598.6
 E360BXXSX  360,000  92.13  80.28  46.46  1,609.7
 E480BXXSX  480,000  109.25  78.82  51.18  2,187.4
 E600BXXSX  600,000  109.53  96.73  51.18  2,315.3


BLOWER WHEEL Package System
(back to top)

This model takes and discharges condensation air on the same face. Air flow from the evaporator side can be either horizontal or vertical. Designed to be used in outdoors where there is a top restriction. They include high efficiency centrifugal fans for a smooth and quiet operation and are factory precharged with R-22. Their installation only requires duct, drain and electrical connections and are available in capacities from 2 up to 10 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 EC024AXXR1X  24,000  35.20  27.72  35.39  326.3
 EC030AXXR1X  30,000  35.20  27.72  35.39  349.5
 EC036XXXR1X  36,000  35.20  27.72  35.39  350.6
 EC048XXXR1X  48,000  46.34  39.76  38.31  500.5
 EC060XXXR1X  60,000  46.34  39.76  38.31  521.5
 EC072XXXR2X  72,000  38.27  42.24  50.04  565.6
 EC096XXXR2X  96,000  66.34  41.46  42.76  831.3
 EC120XXXR2X  120,000  66.34  41.46  42.76  877.6


AXIAL FLOW FAN Package System
(back to top)

This model is designed to take condensation air horizontally with a vertical discharge which makes them suitable for almost any kind of outdoors uses. They include high efficiency axial fans for a smooth and quiet operation and are factory precharged with R-22. Their installation only requires ducts, drain and electrical connections and are available in capacities from 8 up to 50 cooling tons.


 Model  Nominal Capacity (Btu/h)  Width (inches)  Height (inches)  Depth (inches)  Approx. Weight (Pounds)
 EC096XXXV2X  96,000  66.34  41.46  55.24  833.5
 EC120XXXV2X  120,000  66.34  41.46  55.24  879.8
 EC144XXXV2X  144,000  66.53  47.44  72.83  1,323.0
 EC180BVHV2X  180,000  74.02  66.93  89.49  2,302.0
 EC240BVHV2X  240,000  74.02  66.93  89.49  2,383.6
 EC300BVHV2X  300,000  94.49  66.93  97.80  2,987.8
 EC360BVHV1S  360,000  94.49  74.02  103.15  3,845.5
 EC480BVHV2S  480,000  109.53  84.06  96.06  5,016.4
 EC600BVHV2S  600,000  109.53  96.73  130.91  5,236.9



(MANUFACTURER RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE AND WITHOUT INCURRING LIABILITY)
 


(c) 1999. Industrias Per, C.A. Maracaibo, Venezuela